POLETHYLENE UPRIGHT - 50 GALLON

TANK SIZE: 35" LONG X 16" WIDE X 26" HIGH
SHIPPING WEIGHT: TANK CARTON - 80#

The poly tank should only be used for intermittent (dump) applications. It should never be used in a continuous duty (longer than 15 minute cycle times)

Polethylene tank assembly with two (2) inch screw-in NPT bottom ports filler/breather assembly-including 40 micron filter/breather cap (chain mounted) heavy duty mounting base; stainless strap assembly (rubber shielded); screw-in diffuser; one (1) 2” to 1-1/4” plated reducer bushing; and, the mounting and spring kit. This unit may be used for a two or three line system. Tank, base and fill assembly are factory installed and mounted. Diffuser, fill cap, reducer bushing and mounting kit are boxed individually.

STEEL SADDLEMOUNT - 50 GALLON

TANK SIZE: 24" DIAMETER X 27" LONG
SHIPPING WEIGHT: TANK CARTON - 80#
MOUNTING KIT CARTON - 44#

Roll-formed cylindrical steel tank, domed ends are die stamped. Tank powder coated black filter mushroom vent in tank top for increased air exchange. Filler/Breather assembly including 40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure. Three 1-1/4” NPT ports with built-in diffusers. Includes one 1-1/4” NPT plug. Includes Mounting kit: two frame mount powder coated J-brackets (rubber shielded) and two rubber shielded, powder coated carbon steel strap assemblies.

ALUMINUM SADDLEMOUNT - 25 GALLON

TANK SIZE: 24" DIAMETER X 15 " LONG
SHIPPING WEIGHT: TANK CARTON - 29#
MOUNTING KIT CARTON - 44#

Roll-formed cylindrical aluminum tank, domed ends are die stamped; bright mill finish. Filtered mushroom vent in tank top for increased air exchange. Filler/Breather assembly including 40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure. Three heavy duty machined 1-1/4” NPT ports with built-in diffusers. Includes one 1-1/4” NPT plug. Includes Mounting kit: two frame mount powder coated J-brackets (rubber shielded) and two rubber shielded, powder coated carbon steel strap assemblies.

ALUMINUM UPRIGHT - 50 GALLON

TANK SIZE: 34" LONG X 13" WIDE X 26" HIGH
SHIPPING WEIGHT: TANK CARTON - 77#

Total aluminum construction; top tank section built of bright diamond plate, balance bright mill finish; fully baffled. Two heavy duty machined 1-1/4” NPT bottom ports, internally diffused. Features filtered mushroom vent in tank top for increased air exchange Filler/Breather assembly-including 40 micron filter/breather cap (chain mounted with nylon strainer basket and bayonet closure. Dual mounting rails (2” X 2”) welded to tank assembly. Mounting kit includes four pre-drilled powder coating mounting angles, plated bolts, washers, lock-nuts four plated springs, and four pre-drilled mounting pads Mounting kit is boxed and shipped in the tank assembly carton.

STEEL UPRIGHT - 50 GALLON

TANK SIZE: 34" LONG X 13" WIDE X 26" HIGH
SHIPPING WEIGHT: TANK CARTON - 150#

Total steel construction; top tank section built of bright diamond plate, balance bright mill finish; fully baffled. Two heavy duty machined 1-1/4” NPT bottom ports, internally diffused. Features filtered mushroom vent in tank top for increased air exchange Filler/Breather assembly-including 40 micron filter/breather cap (chain mounted with nylon strainer basket and bayonet closure. Dual mounting rails (2” X 2”) welded to tank assembly. Mounting kit includes four pre-drilled powder coating mounting angles, plated bolts, washers, lock-nuts four plated springs, and four pre-drilled mounting pads Mounting kit is boxed and shipped in the tank assembly carton.

ALUMINUM SADDLEMOUNT - 50 GALLON

TANK SIZE: 24" DIAMETER X 27" LONG
SHIPPING WEIGHT: TANK CARTON - 40#
MOUNTING KIT CARTON - 44#

Roll-formed cylindrical aluminum tank, domed ends are die stamped; bright mill finish, Filtered mushroom vent in tank top for increased air exchange. Filler/Breather assembly including 40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure. Three heavy duty machined 1-1/4” NOT ports with built-in diffusers. Includes one 1-1/4” NPT plug. Includes Mounting kit: two frame mount powder coated J-brackets (rubber shielded) and two rubber shielded, powder coated carbon steel strap assemblies.